11.Slide the Weight Stop (32) onto the post on the Leg Lever (11). Next, tighten the Weight Tube
(33)onto the post. Then, attach the Weight Clip
(46)to the Weight Tube.
Next, grease the outside of the barrel of an M10 x 111mm Bolt Set (63). Attach the Leg Lever (11) to the Front Leg (3) with the Bolt Set. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg.
12.Insert the Long Pad Tube (8) into the Front Leg
(3). Slide two Foam Pads (21) onto the Long Pad Tube. Then, press a Pad Cap (22) into each Foam Pad.
13.Insert the two Short Pad Tubes (15) into the Leg Lever (11). Slide two Foam Pads (21) onto each Short Pad Tube. Then, press a Pad Cap (22) into each Foam Pad.
11 | 63 | 3 |
|
|
| ||
| 11 |
| 63 |
|
| Grease | |
|
|
| |
| 32 |
|
|
| 33 |
|
|
46 |
|
|
|
12 |
|
|
|
22 | 21 |
|
|
|
|
| |
| 3 |
|
|
|
|
| 21 |
|
| 8 | 22 |
|
|
| |
13 |
|
|
|
22 | 21 |
|
|
|
|
| |
| 11 |
|
|
21 |
| 15 |
|
|
| 21 | |
|
|
| |
|
|
| 22 |
|
| 15 | 22 |
|
|
| 21 |
10