Maintenance and Troubleshooting

Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.

	For smooth
	operation of the
	elliptical exer-	Ramp
	ciser, inspect	Ramp
	ciser, inspect
	and clean the
	ramp regularly
	using a soft	Wheel
	cloth and mild	Wheel
	cloth and mild
	detergent.
	Other parts of
	the elliptical
	exerciser can
	also be cleaned
	in this way.

Keep liquids off the console. Never use abrasives or solvents.

PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function proper- ly, see step 5 on page 12.

HOW TO CALIBRATE THE INCLINE SYSTEM

If the elliptical exerciser’s ramp does not function prop- erly, press one of the 1 Step Ramp buttons; while the ramp is moving, unplug the power cord. When the power cord is plugged back in, the elliptical exercis- er’s incline system will automatically calibrate itself. During the calibration process, three dashes (– – –) will appear in the console display while the ramp moves to the highest position and then returns to the lowest position.

HOW TO MOVE THE ELLIPTICAL EXERCISER

Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it.

Handlebars

Place your

foot here

Wheel

HOW TO LEVEL THE ELLIPTICAL EXERCISER

If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the rear stabilizer until the rocking motion is elimi- nated.

Leveling

Foot