NordicTrack NTC07940 user manual Assembly

Page 5

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench .

Use the drawings below to identify the small parts used during assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 25. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Split

M6 Washer

 

M10 Split

M8 Nylon

M10 Nylon

Washer (55)–12

(60)–5

 

Washer (88)–2

Locknut (89)–4

Locknut (63)–2

M4 x 16mm

M6 x 20mm Button

M6 x 45mm Button

M8 x 25mm Button

Screw (57)–4

Screw (20)–6

 

Screw (80)–1

Screw (79)–4

M8 x 40mm Button

M8 x 40mm Button

 

 

Screw (54)–8

 

Bolt (81)–4

M10 x 52mm Button Bolt (82)–2

 

 

 

M10 x 118mm Button Screw (78)–2

 

1.Identify the Front Stabilizer (15). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with four M8 x 40mm Button Screws (54) and four M8 Split Washers (55).

1

 

1

 

15

55

 

55

54

 

54

 

5

Image 5
Contents Customer HOT Line QUESTIONS?Model No. NTC07940 Serial No Table of Contents Important Precautions Front Before YOU BeginRight Side RearAssembly Make sure the wires Do not get damaged During this step Wire harnessesSpacer is turned toward the Upright Make sureMake sure the wires Page Installing the Receiver for the Optional Chest Pulse Sensor HOW to Move and Level the Exercise Cycle HOW to Operate the Exercise CycleHOW to Adjust the Seat HOW to Adjust the Pedal StrapsCDs and videocassettes, call toll-free 1-800-735 Console DiagramFeatures of the Console Left display HOW to USE the Manual ModeSelect the manual mode Turn on the fan if desired Select one of the six resistance and pace Programs HOW to USE Resistance and Pace ProgramsMonitor your progress with the two displays Measure your heart rate if desiredHOW to USE Heart Rate Programs Monitor your progress with the two displays HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your Computer Adapter Audio Cable HOW to Connect Your VCRPressVCR. the play button on your CD player or Begin pedaling to activate the console. See onFollow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the exercise cycle and begin Pedaling Optional Chest Pulse SensorHOW to Adjust the Reed Switch Maintenance and TroubleshootingHOW to Adjust the Drive Belt Pulse Sensor TroubleshootingExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Part LIST-Model No. NTC07940R1203A NTC07940 R1203A Limited Warranty HOW to Order Replacement Parts