NordicTrack NTEVEL59011 HOW to USE the Elliptical Crosstrainer, HOW to Adjust the Incline

Page 11

HOW TO USE THE ELLIPTICAL CROSSTRAINER

EXERCISING ON THE ELLIPTICAL CROSSTRAINER

To mount the elliptical crosstrainer, hold the handgrip pulse sensor and step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal disks can turn in either direction. It is recommended that you turn the pedal disks in the direction shown by the arrow below; however, to give variety to your exercise, you may turn the pedal disks in the opposite direction.

Handgrip

Pulse Sensor

Pedal

Pedal Disk

To dismount the elliptical crosstrainer, wait until the pedals come to a complete stop. The elliptical crosstrainer does not have a free wheel; the ped- als will continue to move until the flywheel stops.

each pedal. Slide the pedals forward or backward to the desired position, and then retighten the knobs. Make sure that both pedals are in the same position.

HOW TO ADJUST THE INCLINE

To further adjust the intensity of your exercise, the incline frame can be raised or lowered. To raise the incline frame, position the spring arms side by side. Lift the end of the incline frame until the crossbar is on top of the incline bracket. Make sure that the crossbar is resting securely on top of the incline bracket. To lower the incline frame, lift the incline frame slightly, push the incline bracket toward the upright, and then lower the incline frame onto the

Stabiliser.

 

Upright

Incline

Incline

Frame

Bracket

 

Crossbar

 

Stabiliser

 

HOW TO USE THE UPPER BODY ARMS

When the pedals are stationary, step off the highest pedal first. Then, step off the lowest pedal.

HOW TO ADJUST THE PEDALS

The upper body arms are designed to add upper-body exercise to your workouts. As you exercise, push

Upper Body Arms

The motion of the pedals is deter- mined by their position on the spring arms. There are five different pedal positions. To adjust the pedals, first loosen the knob beneath

Pedal

Knob

and pull the upper body arms in order to work your arms, back, and shoulders. To exercise only your lower body, hold the handgrip pulse sensor as you exercise.

Handgrip

Pulse

Sensor

11

Image 11
Contents Model No. NTEVEL59011 Serial No QUESTIONS?Table of Contents Important Precautions Back Right Side Before YOU BeginFront Assembly Locknut the Incline Bracket must be able to pivot easily Pinched Wire HarnessesMake sure Do not getPage Chest Pulse Sensor Troubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor Care CR 2032 BatteryHOW to Adjust the Pedals HOW to USE the Elliptical CrosstrainerHOW to Adjust the Incline HOW to USE the Upper Body ArmsConsole Diagram Features of the Console Refer to the drawing on Console DescriptionTurn on the console HOW to USE the Manual ModeSelect the manual mode Page Follow your progress with the feedback modes HOW to USE a Preset ProgramSelect one of the four preset programs Start the programHold the handgrip pulse sensor HOW to USE a Heart Rate ProgramSelect one of the two heart rate programs Enter your ageAudio Splitter Cable Headphones HOW to Connect Your Home Stereo HOW to Connect Your Portable StereoHOW to Connect Your VCR HOW to Connect Your ComputerPressVCR. the play button on your CD player or Return to the elliptical crosstrainer and begin exercising HOW to USE Programs Directly from OUR WEB SiteHOW to USE the Information Mode Follow the on-line instructions to start the programLubricating the Incline Bracket Maintenance and TroubleshootingHOW to Level the Elliptical Crosstrainer Battery ReplacementExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. NTEVEL59011NTEVEL59011No Ordering Replacement Parts