NordicTrack NTEVEL59011 Maintenance and Troubleshooting, Lubricating the Incline Bracket

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately.

LUBRICATING THE INCLINE BRACKET

For smooth
operation of
the elliptical
crosstrainer,
the incline	Incline
frame should
	Frame
be kept clean.
	Wheel
Using a soft
cloth and mild
detergent,
clean dust and
other residue
from the incline

The incline bracket and the indicated bolt should be regu- larly lubricated. Apply a small amount of the included lubri- cant to the bolt and between the bracket and the upright.

Upright

Bolt

Incline

Bracket

frame where

HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER

the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this way.

Never use abrasives or solvents.

To prevent damage to the console, keep liquids away from the console. Always remove the batteries from the console when storing the elliptical crosstrainer.

BATTERY REPLACEMENT

If the letters LO appear in the console display, the batteries should be checked. Refer to assembly step 5 on page 7 to find the location of the battery compart- ment. Remove one of the batteries and then re-insert it. If the letters LO continue to appear in the display, replace the batteries.

If the elliptical crosstrainer rocks slightly during use, turn one or both of the Levelling feet under the rear Stabiliser until the rocking motion is elimi- nated.

Levelling

Feet

23