HOW to Connect Your Portable Stereo

Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B. If your stereo has only a PHONES jack, see instruction C.

A. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the audio cable into the Adaptor. Plug the Adaptor into an AUDIO OUT jack on your stereo.

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the audio cable into the Adaptor. Plug the Adaptor into the LINE OUT jack on your stereo.

	A
A/B
	AUDIO OUT
	RIGHT
	LEFT
Audio	Adaptor
Cable

VCR

Amp

LINE OUT

Audio Adaptor Cable

B. Refer to the drawing above. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the audio cable into the LINE OUT jack on your stereo. Do not use the adaptor.

C. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the audio cable into the splitter. Plug the splitter into the PHONES jack on your stereo. Plug your head- phones into the other side of the splitter.

C
	PHONES
Audio
Cable	Splitter
Headphones

B. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the audio cable into the Adaptor. Plug the Adaptor into an RCA Y-Adaptor (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-Adaptor. Plug the Y-Adaptor into the LINE OUT jack on your stereo.

B	CD
	CD
	VCR
	Amp	LINE OUT
	RCA Y-adaptor
Audio Cable	Adaptor
Wire removed from
LINE OUT jack