ParaBody 893103 manual THECABLE25 is in Thegrooveof Thepulleys

FIGURE 6

STEP6:

Pull back the SPRINGPINand slide the SAFETYRAILS(9) over the UPRIGHTS(5) until the S]?I~[NGPINis engagedin ftrst hole.

¯Slide the CARRIAGE(3) over the LrpRIGHTFR.AME(1) as sho~ in FIGURE

STEP7:

¯Insert one 3 X 2" ENDCAP(44) into the TOPBOOM(2) as shownin FIGURE

¯Route end of CABLE(25) (WITHOUTBALL)through the TOPBOOM(2) as shower in FIGURE

¯SECURELYassemble two 3-1/2" PULLEYS(23) to the TOPBOOM(2) using r¢,-o 3/8 X 2-3/4" BOLTS(28), four FLANGESPACERS(42), and t~'o 3/8" LOCK.NUTS(36). See FIGURE7. (NOTE:BEFORETI(.;H'rEi~I2qG, MA.KE

THECABLE(25) IS IN THEGROOVEOF THEPULLEYS.)