Reebok Fitness RBCCEL79021 manual Attach the Right Upper Body Arm 6 in the same way

Page 8

8.Insert the Pivot Axle (21) into the Upright (2), and center the Pivot Axle. Apply a small amount of the included grease to both ends of the Pivot Axle.

Identify the Left Upper Body Arm (5), which is marked with a decal. Insert an Upright Bushing (20) into an Upright Spacer (19). Turn the Upright Spacer so that the semicircular cutout is at the top, and slide the Upright Spacer onto the post on the Left Upper Body Arm.

Slide the Left Upper Body Arm (5) onto the Pivot Axle (21). Attach a Pivot Spacer (17) to the Left Upper Body Arm with an M4 x 16mm Screw (82). Turn a Pivot Endcap (16) so that the rectangular cutout is at the bottom. Using a rubber mallet, tap the Pivot Endcap into the Pivot Spacer.

Slide a Small M8 Washer (71) onto an M8 x 19mm Shoulder Screw (102), and tighten the Patch Screw into the Pivot Axle (21).

Attach the Right Upper Body Arm (6) in the same way.

9.Apply a small amount of grease to the axle on the left Crank Arm (40). Identify the Left Pedal Leg (28), which is marked with a decal. Slide the Left Pedal Leg onto the axle on the left Crank Arm (40). Slide a Large M8 Washer (70) and a Wave Washer (101) onto an M8 x 25mm Patch Screw (73), and tighten the Patch Screw into the axle. Make sure that the

Wave Washer is on the axle before tightening the Patch Screw.

Snap a Pedal Cushion (74) around the Left Pedal Leg (28) onto a Cushion Bracket (99). Make sure that the arrow on the Pedal Cushion is pointing to one of the numbers on the Left Pedal Leg and that the num- ber shows through the window in the Cushion Bracket.

Assemble the Right Pedal Leg (not shown) in the same way.

10.Identify the Left Pedal Arm (33), which is marked with a decal. Attach the Left Pedal (35) to the Left Pedal Arm with two M6 x 20mm Patch Screws (75) as shown.

Attach the Right Pedal (not shown) to the Right Pedal Arm (not shown) in the same way.

8

 

 

 

 

 

 

5

 

 

 

2

 

19

20

21

 

 

 

 

 

7116

17

Post

 

Grease

 

 

6

 

 

 

 

 

102

82

 

 

 

 

9

 

 

 

 

 

 

74

 

 

 

Grease

 

 

 

 

 

 

 

 

 

 

28

Window

99

 

 

40

 

 

 

73

70

101

 

 

10

 

 

75

 

 

 

 

 

 

35

 

 

33

 

 

 

 

 

 

 

8

Image 8
Contents QUESTIONS? Model No. RBCCEL79021 Serial NoTable of Contents Important Precautions Back Right Side Before YOU BeginFront Assembly Wire Harnesses Be careful toAvoid pinching 15, 39 duringInsert all excess wiring down into the Upright Attach the Right Upper Body Arm 6 in the same way Assemble the Right Pedal Leg not shown in the same wayMake sure that no wires are pinched. Reattach Console. Make sure that the receiver is turnedHOW to Exercise on the Elliptical Exerciser HOW to Move and Level the EllipticalElliptical Exerciser Operation ExerciserFeatures of the Console Upper display-The upper display will show the elapsed LowerTurn on the fan if desired HOW to USE Personal Trainer Programs Use the console’s pace function if desiredHOW to USE Heart Rate Programs Enter your ageMonitor your progress with the two displays HOW to Connect Your CD PLAYER, VCR, or Computer HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Adapter Left Udio CableBegin pedaling to activate the console Press the play button on your CD player or VCRHOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start the programReturn to the elliptical exerciser and begin pedaling Optional Chest Pulse SensorMaintenance and Troubleshooting HOW to Level the Elliptical ExerciserConsole Troubleshooting Tightening the PedalsExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Ordering Replacement Parts Limited WarrantyPart LIST-MODELNO. RBCCEL79021 Key No. Qty DescriptionExploded 7686