ASSEMBLY
Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of | ||
the packing materials until assembly is completed. | and a rubber | |
In addition to the included tools, assembly requires an adjustable wrench | ||
mallet | . |
|
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 25. The second number refers to the quantity used in assembly. Note: Some small parts may have been
M6 Split Washer | Small M8 | M10 Split | Wave Washer | Large M8 | |
Washer | Washer | Washer | |||
M10 Nylon | M4 x 16mm | M4 x 19mm | M4 x 25mm | M6 x 20mm Patch | |
Locknut | Screw | Screw | Screw | Screw | |
M6 x 16mm Button | M8 x 19mm Patch | M8 x 25mm Patch | M8 x 19mm Shoulder | ||
Screw | Screw | Screw | Screw | ||
|
|
| Bolt Set |
|
|
1.Identify the Front Stabilizer (63), which has Wheels (27) attached to one side. Attach the Front Stabilizer to the front of the Frame (1) with four M8 x 25mm Patch Screws (73).
1 | 73 | 73 | |
|
| ||
| 63 | 73 | |
27 | 1 | ||
| |||
5 |
|
|