Assembly

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires your own adjustable wrench and phillips screwdriver .

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Washer		M8 Split	M8 Flat	M8 Nylon	M10 Nylon
(25)–6	Washer (65)–4		Washer (18)–4	Locknut (56)–4	Locknut (63)–4
M4 x 16mm		M4 x 22mm	M4 x 25mm	M6 x 16mm Screw	M8 x 19mm Button
Screw (21)–4		Screw (75)–2	Screw (66)–2	(70)–2	Bolt (43)–4
M8 x 25mm Button		M6 x 16mm Hex		M10 x 92mm Carriage Bolt (77)–2
Screw (27)–4		Screw (29)–4
M6 x 38mm Hex			M10 x 105mm Carriage Bolt (74)–2
Screw (68)–4

1.Identify the Front Stabilizer (2), which has Wheels

(59)attached to one side. Attach the Front Stabilizer to the front of the Frame (1) with two M10 x 92mm Carriage Bolts (77) and two M10 Nylon Locknuts

1
	59
2	77
	77
1
63