9. | Firmly tighten the four 5/16Ó x 1Ó Button Screws (80) | 9 |
|
| in the Seat Carriage (11). |
| |
|
|
| |
| Pull the seat knob and slide the Seat Carriage (11) |
|
|
| to the desired position. Release the seat knob and |
|
|
| slide the Seat Carriage back and forth slightly |
|
|
| until it locks into position. |
|
|
|
| 11 |
|
|
| 80 |
|
|
| Knob |
|
10. | Identify the Right Pedal (37) (there is an ÒRÓ on the | 10 |
|
| Right Pedal for identification). Using an adjustable |
| |
|
|
| |
| wrench, tighten the Right Pedal clockwise into the |
|
|
| right Crank Arm (34). |
|
|
| Tighten the Left Pedal counterclockwise into the left | 34 | 38 |
|
|
| |
| Crank Arm (not shown). |
|
|
| Adjust the Pedal Strap (38) on the Right Pedal (37) |
| 37 |
| to the desired position. Press the Pedal Strap onto |
| |
|
|
| |
| the tab on the Right Pedal. |
| Tab |
|
|
| |
| Adjust the Pedal Strap on the Left Pedal in the |
|
|
| same manner (not shown). |
|
|
11.Make sure that all parts are tightened before you use the exercise cycle. Place a mat beneath the exercise cycle to protect the floor.
7