Maintenance and TROUBLE-SHOOTING

Inspect and tighten all parts of the exercise cycle reg- ularly. The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

BATTERY REPLACEMENT

If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 4 on page 5.

HOW TO LEVEL THE EXERCISE CYCLE

If the exercise cycle does not sit flat on the floor, turn one or both of the leveling pads until the exercise cycle is level.

Leveling

Pads

PULSE SENSOR TROUBLE-SHOOTING

¥Avoid moving your hands while using the pulse sen- sor. Excessive movement may interfere with heart rate readings.

¥If your heart rate is not shown when the pulse sen- sor is used, press the resistance Ð button to reset the pulse sensor.

¥Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.

¥For the most accurate heart rate reading, hold the metal contacts for about 15 seconds.

¥For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals.