MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle reg- ularly. Replace any worn parts immediately.
To clean the exercise cycle, use a damp cloth and a small amount of mild soap. Important: To avoid dam- age to the console, keep liquids away from the console and keep the console out of direct sun- light.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 5 on page 7 for replacement instructions.
HOW TO LEVEL THE EXERCISE CYCLE
After the exer-
cise cycle has been moved to the location
where it will be used, make sure that the ends of both front stabi-
lizer are touching the floor. If the exercise cycle
rocks slightly during use, turn one or both of the level- ing feet under the front stabilizers until the rocking motion is eliminated.
HANDGRIP PULSE SENSOR TROUBLESHOOTING If the handgrip pulse sensor does not function properly, see step 5 on page 13.
HOW TO MOVE THE EXERCISE CYCLE
To move the exercise cycle, hold the handle on the rear stabilizer and carefully lift it until the exercise cycle can be moved on the front wheels. Carefully move the exercise cycle to the desired location and then lower it.
Wheel |
Handle |
19