![](/images/new-backgrounds/1271118/27111819x1.webp)
10.Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66).
Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button Screw (106) as shown.
Attach the Right Link Arm (31) in the same way.
10 |
|
|
|
| 24 |
|
|
|
|
| 31 |
|
|
| 106 |
66 | 74 | 103 | |
66 |
| ||
103 |
|
| |
|
|
| |
110 |
|
|
|
|
| 30 |
|
|
| 106 | 66 |
|
| 103 | |
|
|
| 32 |
11.Plug the power cord (not shown) into the power socket (not shown) at the rear of the elliptical exer- ciser.
Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
10