Reebok Fitness RBEL9906.1 manual Turn on the fan if desired, Will turn off automatically

Page 15

5Measure your heart rate if desired.

If there are

 

sheets of clear

Contacts

plastic on the

 

metal contacts

 

on the handgrip

 

pulse sensor,

 

remove the plas-

 

tic. In addition,

 

make sure that

 

your hands are

 

clean. To mea-

 

sure your heart

 

rate, hold the handgrip pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the contacts tightly.

When your pulse is detected, your heart rate will be shown in the display. For the most accurate heart rate reading, hold the contacts for at least 15 seconds.

If your heart rate is not shown, make sure that your hands are positioned as described. Be care- ful not to move your hands excessively or to squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.

6Turn on the fan if desired.

To turn on the fan at high speed, press the Fan button. To turn on the fan at low speed, press the Fan button a second time. To turn off the fan, press the Fan button again. Note: If the pedals have not moved for about thirty seconds, the fan will automatically turn off.

Pivot the fan louvers above the display upward or downward to direct the airflow from the fan.

7will turn off automatically.

If the pedals have not moved for several seconds, a series of tones will sound and the console will pause.

If the pedals have not moved for about five min-

utes, the console will turn off and the display will be reset.When you are finished exercising, the console

15

Image 15
Contents On the WEB Model No. RBEL9906.1 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Rear Before YOU BeginFront Right SideScrew M10 x 93mm Button Screw AssemblyGrease See the inset drawing. Lift the Pedal Arm 107 Repeat this step with the Right Link Arm Attach the Right Link Arm 31 in the same way HOW to USE the Elliptical Exerciser HOW to Plug in the Power CordHOW to Fold and Unfold the Elliptical Exerciser HOW to Exercise on the Elliptical Exerciser HOW to Move the Elliptical ExerciserFeatures of the Console Console DiagramPedals and the incline of the ramp as desired HOW to USE the Manual ModeSelect the manual mode Pedaling to turn on the consoleWill turn off automatically Turn on the fan if desiredHOW to USE a Preset Program Turn on the console. See on Select a preset programBegin pedaling to start the program Turn on the console. See on Select a custom program HOW to Create a Custom ProgramProgram the desired settings Follow your progress with the displayHOW to USE a Custom Program Using it. To change the resistance level forMemory. To change the target pace for the cur HOW to USE a Heart Rate Program Enter a target heart rate settingTurn on the console. See on Select a heart rate program Begin pedaling to start the program HOW to USE the Stereo Sound System HOW to USE AN Ifit ProgramMaintenance and Troubleshooting HOW to Adjust the BeltHandgrip Pulse Sensor Troubleshooting Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-MODELNO. RBEL9906.1Qty Description Exploded Drawing A-MODEL NO. RBEL9906.1 R1206A Exploded Drawing B-MODEL NO. RBEL9906.1 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT