Life Fitness 8500 3 manual Press Cable

Page 27

44

37

48

82

80

35

44 PRESS CABLE

89 3/8 X 2”

FIGURE 33

STEP 33:

•SECURE the ball end of the PRESS CABLE (44) and two 4-1/2” PULLEYS (48) to the SWIVEL PULLEY BRACKET (35) using two 3/8 X 2” BOLTS (89), four 3/8” WASHERS (80), and two 3/8” LOCK NUTS (82) as shown in FIGURE 33. (NOTE: Loop the cable around the pulleys prior to inserting it into the SWIVEL PULLEY BRACKET.)

•Route the threaded end of the PRESS CABLE (44) through the large hole in the PRESS FRAME (37) as shown in FIGURE 33.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 8500 3-STACK MULTI-GYM Important Notes Parts List Step Step 105 104 X 1-1/4 X 4 92 3/8 X LOW Height 86 LOW Height 6252 94 1/2 X 86 1/2 LOW Height 94 1/2 X 115 3/8 X 3 Counter Sunk X 1-1/4 97 1/2 X 6-1/2 101 91 3/8 X 3-1/4 Step 94 1/2 X 88 3/8 X 1-1/4 Same Time X 3-1/4 103 Button Head As shown in Figure Step Page LAT Cable It in the the slot Loosely assemble two 4-1/2 Pulleys PEC Cable Detail Press Cable Press CABLE38 Press
Top Page Image Contents