Glowworm Lighting 40 manual High/Low Control diagram 14.4, Air Pressure Switch diagram

14 Replacement of Parts

4078

CONTROL THERMOSTAT

SECURING SCREW (2)

		RETAINING
		PIN
		OVERHEAT CUT
		OFF PHIAL
	ELECTRICAL
	CONNECTION (5)	CONTROL
OVERHEAT
		THERMOSTAT
CUT OFF
		PHIAL
LOCKNUT

Diagram 14.4

CONTROLS	HIGH/LOW	CONTROL	4066
	CONTROL	THERMOSTAT
FASCIA
	KNOB	KNOB

SECURING	CONTROLS
SCREW (3)
	FASCIA

Diagram 14.4A

	4067S
ELECTRICAL
CONNECTIONS
RESET	FLUE HOOD
BUTTON
	OVERHEAT
SECURING	THERMOSTAT
SCREW (2)	Diagram 14.5

14.5“High/Low” Control: diagram 14.4 and

Remove the fascia as described in Section 14.4. Remove the four screws securing the lights bracket. Remove the locknut to release the “High/Low” control. Disconnect the three in-line electrical connectors. When refitting refer to wiring diagram 13.2

14.6 Air Pressure Switch: diagram 14.7.

Remove the air pressure tubes and electrical connections.

Remove the two securing screws to release the air pressure switch.

When fitting the replacement make sure that all the air pressure tubes and electrical connections are made as shown.

35 221834B