Image IMBE39400 user manual

10.Locate a Cable (25) and notice that there is a ball on one end of the Cable and a metal sleeve on the other end.

Route the metal-sleeve end of the Cable (25) up under the lat bar rest on the Weight Guide Frame (14), down through the indicated hole, back up through the next hole, and then down through the hole between the Weight Guides (9) as shown.

11.Insert the end of the Cable (25) into the hole in the center of the Weight Carriage (15). Attach the Cable using a 3/8” x 2 1/2” Bolt (35), two 3/8” Washers (37), two 3/4” Spacers (38), and a 3/8” Nylon Lock Jamnut (29).

12Lift the Cable (25) in the location shown. Attach two Pulleys (24) inside the bracket on the Weight Guide Frame (14) using two 3/8” x 2” Bolts (32) and two 3/8” Nylon Lock Jamnuts (29).

13.Lift the Cable (25) in the location shown. Attach two Pulleys (24) inside the Weight Guide Frame (14) using two 3/8” x 3” Bolts (34), four 3/8” Washers (37), four 3/4” Spacers (38), and two 3/8” Nylon Lock Jamnuts (29).

10			14
Lat Bar			9
Rest
25
11
	37	38	25
	29
			38
			37
	15		35
12	24
			25
	29		14
			32
13	24
37			25
	38		14
29
37			38
			37
38			34
	38
	37

9