JVC LVT1364-002B manual Programming the Track Playing Order -Program Play, Basic Disc Operations

Page 14

Tag To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’s pivot lightly.

•If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start.

•If no disc is inserted

“NO DISC” appears on the display.

DO NOT open the disc cover by hand as it will be damaged.

To locate a particular point in a track

During play, press and hold ¢ or 4 (or

PRESET

 

 

 

UP

UP ¢ or DOWN 4 on the unit).

GROUP

 

 

 

• ¢ (UP ¢):

Fast-forwards the

 

 

 

DOWN

GROUP

 

 

PRESET

tracks.

•4 (DOWN 4): Fast-reverses the tracks.

Programming the Track Playing Order —Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks.

Basic Disc Operations

While playing a disc, you can do the following operations.

On the remote control ONLY:

1 Place a disc.

•If the current source is not the CD player, press CD 6, then 7 before going to the next step.

To stop playing for a moment

During play, press CD 3/8.

CD

3/8

While pausing, the elapsed playing time flashes on

 

the display.

 

To resume playing, press CD 3/8 again.

To go to another track

Before or during play, press ¢ or 4 (or

 

UP

PRESET

 

 

GROUP

UP ¢ or DOWN 4 on the unit)

 

 

 

 

 

 

repeatedly.

 

PRESET

 

 

DOWN

 

 

GROUP

• ¢ (UP ¢):

Skips to the beginning

 

 

 

 

of the next or succeeding

 

 

 

 

tracks.

 

 

 

2 Press PROGRAM.

The PRGM (program) indicator starts flashing on the display.

PRGM

3 Press ¢ or 4 to select the track number, then press

PROGRAM.

Track number

Program step

number

PROGRAM

UP

PRESET

GROUP

DOWN

PRESET

GROUP

•4 (DOWN 4): Goes back to the beginning of the current or previous tracks.

PROGRAM

PRGM

To go to another track directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) before or

1

2

3

during play allows you to start playing the

 

 

 

track number you want.

4

5

6

You can also use the number button(s) to select a track number.

•For the operation of the number buttons, see “To go to another track directly using the number buttons” on the left column.

1 2 3

4 5 6

7 8 9

OVER

0

Ex.: For track number 5, press 5.

 

 

 

For track number 15, press OVER,

7

8

9

then press 1, 5.

 

 

OVER

For track number 20, press OVER,

 

0

 

then press 2, 0.

 

 

 

(For MP3 disc only)

 

 

 

For track number 20, press OVER, then

 

 

 

press 0, 2, 0.

 

 

 

For track number 156, press OVER, then press 1, 5, 6.

When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP

selects the first track of each group.

4 Repeat step 3 to program other tracks you want.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents UX-G4 UX-G3 Important for Laser Products Above ALL About This Manual PrecautionsIntroduction Contents Top view Location of the Buttons and ControlsMain Unit Front viewDisplay window Main unit Display windowRemote Control Preset Group /UP, Preset Group /DOWNGetting Started Connecting AM MW and FM AntennasConnecting Speakers UnpackingTo remove the speaker grilles Connecting Other EquipmentPutting the Batteries into the Remote Control To connect an audio equipmentCommon Operations Setting the ClockTurning On the Power Turning Off the Unit Automatically Auto StandbySelecting the Sound Modes Adjusting the VolumeSelecting the Source Reinforcing the Bass SoundPress Open on top of the unit Playing Back DiscsPlaying Back the Entire Disc-Normal Play Place a disc correctly with its label side upProgramming the Track Playing Order -Program Play Basic Disc OperationsRepeating Tracks-Repeat Play Press CD 3/8Displaying the Remaining Time during Playback On the remote control only Press RandomPlaying at Random-Random Play Press Remain repeatedlyPlaying Back Tapes Playing Back a TapeListening to FM and AM MW Broadcasts Tuning in to a StationPresetting Stations Changing the RDS Information Tuning in to a Preset StationReceiving FM Stations with RDS Down 4 on the unit Searching for Programs by PTY Codes PTY SearchPress ¢ or 4 or UP ¢ or If no program is found, no MatchListening to the External Equipment Using an External EquipmentSet the volume level to the minimum position Press AUX For operation of the external equipmentRecording on a Tape To record on both sides-Reverse ModeRecording Press REC recordingPlayback When making Sleep Timer settings while RecordingRecording Discs Disc Synchronized Recording Repeatedly until Is litActivate-Daily 1, Daily 2, Daily 3, or Rec Using the TimersUsing Daily Timer and Recording Timer Set the on-time you wantPress STANDBY/ON to turn Using Snooze TimerPress and hold Daily TIMER/ Snooze on the unit Off the unitHow the Sleep Timer actually works Using Sleep TimerOn the remote control only Press Sleep Handling discs MaintenanceCleaning the unit Handling cassette tapesPossible Cause Action TroubleshootingSymptom Specifications UX-G4/UX-G3 Micro Component System
Top Page Image Contents