JVC LVT1364-002B manual Using the Timers, Using Daily Timer and Recording Timer, Unit to turn on

Page 24

Using the Timers

There are four timers available—Daily Timer, Recording Timer, Snooze Timer, and Sleep Timer.

•Before using these timers, make sure the built-in clock is set correctly (see page 8).

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly to CLOCK/TIMER select the timer you want to adjust

and activate—Daily 1, Daily 2, Daily 3, or Rec.

The timer setting and hour indication start flashing on the display.

Each time you press the button, the display changes as

How the Timer actually works

When the on-time comes, the unit automatically turns on (the [timer] indicator flashes and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby). The timer setting remains in memory until you change it.

•When the (timer) and DAILY 1, 2, or 3 indicators are lit on the display, the timer acts as the Daily Timer. Once the timer has been set, it will be activated at the same time and automatically turns off (standby) after 60 minutes everyday until the timer is deactivated.

•When the (timer) and the REC indicators are lit on the display, the timer acts as the Recording Timer. After the timer-recording finishes, the details of the setting remain stored but the timer is turned off.

Before you start...

When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.

follows:

 

ON

 

DAILY 1

ON

 

DAILY

2

ON

 

DAILY

3

 

REC

ON

 

Clock setting

Normal indication

Daily 1 Timer

Daily 2 Timer

Daily 3 Timer

Rec Timer

2 Set the on-time you want the

PRESET

 

 

UP

unit to turn on.

GROUP

 

 

 

(1) Press UP or DOWN to set the hour,

 

 

 

DOWN

then press SET.

PRESET

GROUP

(2) Press UP or DOWN to set the minute,

 

 

 

then press SET.

 

 

 

If you want to change the time setting,

 

 

 

press CANCEL.

 

 

 

 

SET

• If you are setting the Daily Timer, the source name starts flashing on the display.

\ Go to step 4.

•If you are setting the Recording Timer,

the OFF indicator and hour indication start flashing on the display.

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents UX-G4 UX-G3 Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Main UnitTop view Front viewDisplay window Main unit Display windowRemote Control Preset Group /UP, Preset Group /DOWNConnecting AM MW and FM Antennas Connecting SpeakersGetting Started UnpackingConnecting Other Equipment Putting the Batteries into the Remote ControlTo remove the speaker grilles To connect an audio equipmentSetting the Clock Turning On the PowerCommon Operations Turning Off the Unit Automatically Auto StandbyAdjusting the Volume Selecting the SourceSelecting the Sound Modes Reinforcing the Bass SoundPlaying Back Discs Playing Back the Entire Disc-Normal PlayPress Open on top of the unit Place a disc correctly with its label side upProgramming the Track Playing Order -Program Play Basic Disc OperationsRepeating Tracks-Repeat Play Press CD 3/8On the remote control only Press Random Playing at Random-Random PlayDisplaying the Remaining Time during Playback Press Remain repeatedlyPlaying Back Tapes Playing Back a TapeTuning in to a Station Presetting StationsListening to FM and AM MW Broadcasts Tuning in to a Preset Station Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY Search Press ¢ or 4 or UP ¢ orDown 4 on the unit If no program is found, no MatchUsing an External Equipment Set the volume level to the minimum position Press AUXListening to the External Equipment For operation of the external equipmentTo record on both sides-Reverse Mode RecordingRecording on a Tape Press REC recordingWhen making Sleep Timer settings while Recording Recording Discs Disc Synchronized RecordingPlayback Repeatedly until Is litUsing the Timers Using Daily Timer and Recording TimerActivate-Daily 1, Daily 2, Daily 3, or Rec Set the on-time you wantUsing Snooze Timer Press and hold Daily TIMER/ Snooze on the unitPress STANDBY/ON to turn Off the unitUsing Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Maintenance Cleaning the unitHandling discs Handling cassette tapesTroubleshooting SymptomPossible Cause Action Specifications UX-G4/UX-G3 Micro Component System
Top Page Image Contents