JVC LVT1364-002B manual Maintenance, Cleaning the unit, Handling discs, Handling cassette tapes

Page 27

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Cleaning the unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

DO NOT wipe it with a rough cloth.

DO NOT wipe it too vigorously.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as an insecticide to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

Remove the disc from its case by holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

If the tape is loose, it may get stretched, cut, or caught in the cassette.

Be careful not to touch the tape surface.

Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

In moist areas

On a TV or speaker

Near a magnet

To keep the best recording and playback sound quality

You need to clean the heads.

Clean the heads after every 10 hours of use with

a wet-type head cleaning tape (available at electronic and audio shops).

When the head becomes dirty, the following symptoms will occur:

Sound quality is reduced.

Sound level decreases.

Sound drops out.

Do not play dirty or dusty tapes.

Do not touch the highly-polished head with any metallic or magnetic tools.

Capstan

Head

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean

the disc.

Pinch Roller

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

24

Image 27
Contents UX-G4 UX-G3 Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Front view Location of the Buttons and ControlsMain Unit Top viewMain unit Display window Display windowPreset Group /UP, Preset Group /DOWN Remote ControlUnpacking Connecting AM MW and FM AntennasConnecting Speakers Getting StartedTo connect an audio equipment Connecting Other EquipmentPutting the Batteries into the Remote Control To remove the speaker grillesTurning Off the Unit Automatically Auto Standby Setting the ClockTurning On the Power Common OperationsReinforcing the Bass Sound Adjusting the VolumeSelecting the Source Selecting the Sound ModesPlace a disc correctly with its label side up Playing Back DiscsPlaying Back the Entire Disc-Normal Play Press Open on top of the unitBasic Disc Operations Programming the Track Playing Order -Program PlayPress CD 3/8 Repeating Tracks-Repeat PlayPress Remain repeatedly On the remote control only Press RandomPlaying at Random-Random Play Displaying the Remaining Time during PlaybackPlaying Back a Tape Playing Back TapesTuning in to a Station Presetting StationsListening to FM and AM MW Broadcasts Tuning in to a Preset Station Receiving FM Stations with RDSChanging the RDS Information If no program is found, no Match Searching for Programs by PTY Codes PTY SearchPress ¢ or 4 or UP ¢ or Down 4 on the unitFor operation of the external equipment Using an External EquipmentSet the volume level to the minimum position Press AUX Listening to the External EquipmentPress REC recording To record on both sides-Reverse ModeRecording Recording on a TapeRepeatedly until Is lit When making Sleep Timer settings while RecordingRecording Discs Disc Synchronized Recording PlaybackSet the on-time you want Using the TimersUsing Daily Timer and Recording Timer Activate-Daily 1, Daily 2, Daily 3, or RecOff the unit Using Snooze TimerPress and hold Daily TIMER/ Snooze on the unit Press STANDBY/ON to turnUsing Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Handling cassette tapes MaintenanceCleaning the unit Handling discsTroubleshooting SymptomPossible Cause Action Specifications UX-G4/UX-G3 Micro Component System