JVC LVT1364-002B manual Introduction, About This Manual, Precautions

Page 4

Introduction

We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference.

About This Manual

This manual is organized as follows:

This manual mainly explains operations using the buttons on the remote control.

You can use the buttons both on the remote control and on the unit for the same operations if they have the same or similar names (or marks), unless mentioned otherwise.

Basic and common information that is the same for many functions is grouped in one place, and is not repeated for each procedure. For instance, we do not repeat the information about turning on/off the unit, setting the volume, changing the sound effects, and others, which are explained in the section “Common Operations” on pages 8 and 9.

The following symbols are used in this manual:

Gives you warning and caution to prevent damage or risk of fire/electric shock.

In addition, we put information here about conditions which will prevent getting the best possible performance from the unit.

Gives you information and hints you need to know.

Power sources

When unplugging the unit from the wall outlet, always pull on the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lenses inside the unit in the following cases:

After starting to heat the room.

In a damp room.

If the unit is brought directly from a cold to a warm place. Should this occur, the unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Others

Should any metallic object or liquid fall into the unit, unplug the AC power cord and consult your dealer before operating any further.

If you are not going to operate the unit for an extended period of time, unplug the AC power cord from the wall outlet.

Rating label is placed on the exterior of the bottom.

DO NOT disassemble the unit since there are no user serviceable parts inside.

Precautions

Installation

Install in a place which is level, dry and neither too hot nor too cold—between 5˚C and 35˚C.

Install the unit in a location with adequate ventilation to prevent internal heat buildup.

Leave sufficient distance between the unit and the TV.

Keep the speakers away from the TV to avoid interference with TV.

DO NOT install the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

If anything goes wrong, unplug the AC power cord and consult your dealer.

1

Image 4
Contents UX-G4 UX-G3 Important for Laser Products Above ALL Introduction PrecautionsAbout This Manual Contents Location of the Buttons and Controls Main UnitTop view Front viewDisplay window Main unit Display windowRemote Control Preset Group /UP, Preset Group /DOWNConnecting AM MW and FM Antennas Connecting SpeakersGetting Started UnpackingConnecting Other Equipment Putting the Batteries into the Remote ControlTo remove the speaker grilles To connect an audio equipmentSetting the Clock Turning On the PowerCommon Operations Turning Off the Unit Automatically Auto StandbyAdjusting the Volume Selecting the SourceSelecting the Sound Modes Reinforcing the Bass SoundPlaying Back Discs Playing Back the Entire Disc-Normal PlayPress Open on top of the unit Place a disc correctly with its label side upProgramming the Track Playing Order -Program Play Basic Disc OperationsRepeating Tracks-Repeat Play Press CD 3/8On the remote control only Press Random Playing at Random-Random PlayDisplaying the Remaining Time during Playback Press Remain repeatedlyPlaying Back Tapes Playing Back a TapePresetting Stations Tuning in to a StationListening to FM and AM MW Broadcasts Receiving FM Stations with RDS Tuning in to a Preset StationChanging the RDS Information Searching for Programs by PTY Codes PTY Search Press ¢ or 4 or UP ¢ orDown 4 on the unit If no program is found, no MatchUsing an External Equipment Set the volume level to the minimum position Press AUXListening to the External Equipment For operation of the external equipmentTo record on both sides-Reverse Mode RecordingRecording on a Tape Press REC recordingWhen making Sleep Timer settings while Recording Recording Discs Disc Synchronized RecordingPlayback Repeatedly until Is litUsing the Timers Using Daily Timer and Recording TimerActivate-Daily 1, Daily 2, Daily 3, or Rec Set the on-time you wantUsing Snooze Timer Press and hold Daily TIMER/ Snooze on the unitPress STANDBY/ON to turn Off the unitOn the remote control only Press Sleep Using Sleep TimerHow the Sleep Timer actually works Maintenance Cleaning the unitHandling discs Handling cassette tapesSymptom TroubleshootingPossible Cause Action Specifications UX-G4/UX-G3 Micro Component System