Continued
4 Set the
the unit to turn on. | PREV. |
1)Press 4or ¢ to set the hour, then press SET.
2)Press 4or ¢ to set the minute, then press SET.
“OFF TIME” appears for 2 seconds, then the unit enters
5 Set the
1)Press 4or ¢ to set the hour, then press SET.
2)Press 4or ¢ to set the minute, then press SET.
The unit enters preset station selecting mode.
6 Select a preset station.
1)Press 4or ¢ to select the
band (“TUNER FM” or “TUNER PREV. AM”), then press SET.
2)Press 4or ¢ to select a preset channel number, then press SET. The REC (recording timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.
PRESET
NEXT
SET
PRESET
NEXT
SET
PRESET
NEXT
SET
Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
On the remote control ONLY:
1 Press SLEEP.
The time length until the
•Each time you press the button, the time length changes as follows:
SLEEP10 SLEEP20 SLEEP30 SLEEP60
OFF SLEEP120 SLEEP90
(Canceled)
2 Wait for about 5 seconds after specifying the time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the
To change the
7 Press STANDBY/ON to | STANDBY/ON |
| STANDBY |
turn off the unit (on standby) if |
|
necessary. |
|
If you want to listen to another source while recording
Press REC START/STOP or 7 to stop recording. Without stopping it, you cannot change the source.
To turn on or off Recording Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until | CLOCK |
/ TIMER | |
“REC” appears on the display. |
|
2 To turn off the Recording Timer, press
CANCEL/DEMO.CANCEL
/DEMO
The REC (recording timer) indicator goes off from the display (“OFF” appears for a while). The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.
SET
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up on the display. The settings you have done are
shown on the display in sequence for your confirmation.
To cancel the setting, press SLEEP repeatedly until “OFF” appears on the display so that the SLEEP indicator goes off from the display.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.
Here are examples.
•If Recording Timer and Daily Timer has the same timer on- time, Recording Timer has priority over Daily Timer.
•If Sleep Timer overlaps with another timer (either Daily Timer or Recording Timer), a timer with the earlier
AM 6:00 6:30 | 7:00 | 7:30 |
Sleep Timer
Recording Timer canceled.
When using the Recording Timer and Sleep Timer at the same time, pay special attention to the
– 36 –