JVC MX-DVA5 manual Using the Timers

Page 83

Using the Timers

Continued

 

 

English

There are three timers available — Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See “Setting the Clock” on page 10.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level gradually, and starts playing the specified source

when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day until you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a disc as the source to play —

–Make sure there is a disc on the currently selected disc number tray.

•When using a tape as the source to play —

–Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•When using the external component as the source to play —

–Set the timer equipped with the external component at the same time.

On the unit ONLY:

1

Press CLOCK/TIMER repeatedly

CLOCK

/ TIMER

 

 

until “DAILY” appears on the display.

The indicator lights up and the DAILY (daily timer) indicator also starts flashing on the display.

2 Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the unit enters on-time setting mode.

3 Set the on-time you want the

 

unit to turn on.

PREV.

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

PREV.

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

The unit enters source selecting mode.

5 Press 4or ¢to select the source to play, then press

PREV.

SET.

•Each time you press 4 or ¢, the source changes as follows:

TUNER FMTUNER AM

AUX TAPE DVD/CD

CLOCK / TIMER

PRESET

NEXT

SET

PRESET

NEXT

SET

PRESET

NEXT

SET

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Canceled CLOCK ON TIME

(See page 10.)

TUNER FM: tunes into a specified preset FM station.

=go to step 6.

TUNER AM: tunes into a specified preset AM station.

=go to step 6.

DVD/CD: plays a disc. =go to step 7.

TAPE: plays a tape in deck A or B. =go to step 7.

AUX: plays an external source. =go to step 7.

– 34 –

Page 82 Page 84
Image 83
Page 82 Page 84
Contents Compact Component System Mises en garde, précautions et indications diverses For Canada/pour le Canada About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsDisplay window Front PanelHow to open the front lid Remote ControlRemote Control Getting Started Unpacking Connecting AntennasTo connect an outdoor AM antenna Connecting SpeakersAM antenna To connect other audio components Connecting Other EquipmentTo connect the TV About sounds reproduced through the rear terminals Cancelling the Display DemonstrationOn the unit only To start the display demonstration manuallySelecting the Sources Turning On and Off the PowerSetting the Clock Common OperationsReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Creating a Being-There Feeling On the remote control only Press 3D Sound during playSelecting the Sound Modes Listening to FM and AM Broadcasts Tuning in a StationTuning in a Preset Station Presetting StationsIf Invalid appears on the TV screen when Disc Introduction-DVD/VCD/CDDisc structure DVD, Video CD VCD and Audio CD CD Sure of the followingPlaying Back Discs Basic Disc OperationsLoading Discs To go to another chapter or track Prohibiting Disc Ejection-Tray LockTo skip to another disc in the carrousel To stop play for a momentShowing the On-Screen Bar DVD PlaybackSelecting the Audio Languages Selecting the SubtitlesSelecting the Multi-Angle Views How to input the playing time On the remote control only Press MENU/PBC or TitleOn the remote control only Press GO to during play or pause How to input the title and chapter numberPress A-B Repeat again to select the end point Searching for a Particular PointRepeating Playback Press A-B Repeat to select the start pointProgramming the Playing Order of the Chapters-Program Play DVD Special Effect Playback On the remote control only Press Zoom to zoomDisc Menu-Driven Playback Only for VCD When a menu appears, select a desired item on the disc menuVCD/CD Playback To reverse the track, press 1 during play To fast-forward the track, press ` during playREP. ONE Program you made is still kept Programming the Playing Order of the Tracks-Program PlayRepeat to program other tracks you want VCD Special Effect Playback Language selecting procedure Setting up the DVD OperationsSetting the Initial Languages Press SetupTo cancel the setting you have just made, press Setting the DVD Preference SystemPreference System setting procedure To reset the password Setting the Parental LockPress the number buttons to enter the password 4 digits To change the passwordPlaying Back a Tape Playing Back TapesTo protect your recording To record on both sides Reverse ModeRecording Recording a Tape on Deck BTo stop during dubbing, press Dubbing TapesCD Synchronized Recording Using Daily Timer Using the TimersUsing Recording Timer Timer Priority Using Sleep TimerHandling cassette tapes MaintenanceTo clean the disc Handling discsSymptom TroubleshootingGlossary Specifications Authorized Service Centers Limited Warranty JVC 0801KSMMDWSAM Instructions Mises en garde, précautions et indications diverses English Français English Contents Location of the Buttons and Controls Pressing one of these buttons also turns on the unit Vocal Masking Putting the Batteries into the Remote Control Connecting Speakers 7Analog components Cancelling the Display Demonstration Common Operations Adjusting the Volume Sound Mode indicator Also lights up on the display Press and hold Áor Example 1 DVD disc Loading Discs Playing Back Discs To close the carrousel, press Disc Change DVD Playback Selecting the Subtitles Disc Menu-Driven Playback To fast-forward the chapter, press Áduring play Programming the Playing Order Chapters-Program Play DVD Special Effect Playback VCD/CD Playback To fast-forward the track, press Á during play Repeating Playback Track Previous Next Play Picture frame by frame Press Still repeatedly to advanceÈÇ\ Move Setup Exit Setting the DVD Preference System To set the parental level Playing Back Tapes Recording Dubbing Tapes Using the Timers Tuner AM in step Select a preset station Number Using Sleep Timer Maintenance Troubleshooting Glossary At 63 Hz with no more than 10% total EN, FR

MX-DVA5 specifications

The JVC MX-DVA5 is a compact, high-performance mini system designed to deliver a powerful audio experience while maintaining a modern aesthetic. This system is a versatile solution for music enthusiasts who appreciate both style and functionality. Its primary features set it apart from other models in the market, making it a popular choice for home use and small gatherings.

One of the standout characteristics of the JVC MX-DVA5 is its robust sound quality. Equipped with dual stereo speakers, the system can produce a rich, dynamic sound that fills any space. The integrated amplifier ensures that the audio clarity is maintained at various volume levels, preventing distortion and enhancing overall listening pleasure.

The JVC MX-DVA5 boasts a variety of playback options to accommodate different user preferences. It features a CD player, allowing users to enjoy their favorite CDs with ease. In addition to traditional media, the system includes USB and AUX inputs, enabling users to connect their smartphones, tablets, or other devices for direct playback. This versatility ensures compatibility with modern digital formats while still honoring classic media.

Technologically, the JVC MX-DVA5 incorporates Bluetooth connectivity, allowing for seamless wireless streaming from smartphones or other Bluetooth-enabled devices. This feature is particularly beneficial for users who prefer to create playlists from their mobile devices without the need for cumbersome cables.

The system also includes FM radio capabilities, offering users access to a variety of radio stations for news, music, and entertainment. The built-in tuner allows for easy station navigation and preset options, making it convenient to access favorite channels.

Further enhancing user experience, the JVC MX-DVA5 is designed with an intuitive remote control, allowing for easy operation from a distance. The compact design does not compromise on power, making it an attractive addition to any room without taking up excessive space.

Overall, the JVC MX-DVA5 is a well-rounded mini audio system that combines modern technology with high-quality audio performance. Its main features, including robust sound output, versatile playback options, Bluetooth connectivity, and an appealing design, make it an attractive choice for anyone looking to elevate their audio experience in a compact form factor. Whether for casual listening or lively gatherings, the JVC MX-DVA5 delivers a satisfying audio solution.
Top Page Image Contents