assembly instructions
ASSEMBLY
Step 7:
Hook the Lift Bar (11) onto the Racks (5).
NOTE: The Hinge Plate (29) MUST face front.
Insert the Guide Rod (9) through the sleeve on Lift Bar (11), 2" Rubber Doughnut (63), Right Adj Height Arm (13) and into the sleeve on Side Base (2). Then secure with 5/16" x 3/8" Set Screw (85). Hook Left Adj Height Arm (14) onto Rack
(5). Repeat the same procedure for left side of Lift Bar (11) and Left Adj Height Arm (14).
Slide 3" Rubber Doughnut (61) and Long Olympic Sleeve (36) onto each end of Lift Bar (11). Secure Long Olympic Sleeve (36) with 5/16" x 1/2" Set Screw (86). Attach 2" Spring Clip (57) to Long Olympic Sleeve (36).