Gold's Gym GGEX61607.0 manual Tip Avoid pinching the Wire Harnesses 36, During this step

2.While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (6) with two M10 x 75mm Carriage Bolts (30) and two M10 Nylon Locknuts (33).

3. Tip: Avoid pinching the Wire Harnesses (36, 55)

during this step.

While another person holds the Upright (13) in the

position shown, connect the Upper Wire Harness (36)

2

33

6

33

1

30

3

to the Lower Wire Harness (55).

Carefully pull the excess Upper Wire Harness (36) out

of the top of the Upright (13), and slide the Upright

onto the Frame (1). Next, attach the Upright with three

M8 x 25mm Button Screws (45) and three M8 Split

Washers (41).

Attach the Water Bottle Holder (8) to the Upright (13)

with two M4 x 22mm Screws (20).

41

45

Avoid pinching the Wire Harnesses (36, 55) during this step

8

20

13

41 45

36 55

1

6