Assembly

Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

The following tools are required for assembly: the included allen wrenches and your own

phillips screwdriver adjustable wrench and rubber mallet .

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Split	M10 Split	M8 Washer	Curved	M10 Flat
Washer (85)Ð4	Washer (73)Ð4	(89)Ð4	Washer (74)Ð4	Washer (94)Ð5
M4 x 16mm	M4 x 16mm	M8 x 19mm Button	Console Plate	M10 Nylon
Screw (60)Ð5	Flange Screw	Screw (76)Ð4	Screw (39)Ð4	Locknut (55)Ð6
	(88)Ñ6
Patch Bolt (90)Ð1			Handlebar Bolt (92)Ð4
		Carriage Bolt (2)Ð2