Sync Mode
Syncing will need to be performed in any of the following events:
•First receiving the Spinning Computer Kit.
•Changing the 4AA batteries on the Computer.
•The original cadence and computer are no longer a pair. (i.e. when users swap handlebars with the computer attached.)
Syncing process when first receiving the kit or installing/replacing the 4 AA batteries:
1.Remove the battery lid on the backside of the Spinning Computer and insert or replace the 4 AA batteries.
2.Once the batteries are installed, the user will see characters on the display window which confirms that the Workout mode has been activated.
3.To begin the Syncing process, press and hold Toggle and Light buttons simultaneously.
The display should now show “Conn _ _ _” on the window.
4.Within one minute, press the Reset button on the Cadence and wave the magnet along any of the Cadence sides.
Press Reset Button
5.Note: If Cadence and magnet are already mounted onto the Spinning bike, move flywheel of Spinning bike to pass magnet by Cadence.
6.Once the magnet passes by the Cadence (may have to pass magnet by cadence several times), the syncing process will be confirmed when a random ID is displayed “Id xxxxx” (e.g. Id 45896)
7.Accept ID by pressing the Toggle button.
8.Once the Syncing process is done, the display should start showing the Workout mode.
8