Re-Syncing process
Syncing process for when the original cadence and computer are no longer a pair:
1.To begin the Syncing process, press and hold Toggle and Light buttons simultaneously.
The display should now show “Conn _ _ _” on the window.
2.Within one minute, press the Reset button on the Cadence and wave the magnet along any of the Cadence sides.
Press Reset Button
Note: If Cadence and magnet are already mounted onto the Spinning bike, move flywheel of Spinning bike to pass magnet by Cadence.
5.Once the magnet passes by the Cadence (may have to pass magnet by cadence several times), the syncing process will be confirmed when a random ID is displayed “Id xxxxx” (i.e. Id 45896)
6.Accept ID by pressing the Toggle button.
7.Once the Syncing process is done, the display should start showing the Workout mode.
9