Star Trac Bike Computer manual Setup Mode, To activate Set-Up Mode, Setup mode options

Page 8

Setup Mode

Setup is required only if you need to change a setting or view information.

To activate Set-Up Mode:

1.Press any button to activate computer.

2.Wave a magnet along the right side of the Spinning® Computer until the display window shows all LCD segments flash.

3.Press Toggle (right) button to scroll through available set-up options.

4.Press the Light (left) button to change settings on the current display option.

Setup mode options:

GEAR and Software Version - Gear Ratio, Select 1 (2.875) for V Bike models or 2 (3.250) for all other models.

• Units - Miles or KM

5

Image 8

Contents Spinning Computer Page Table of Contents FCC Regulatory Statements Parts List All 727-0083 Spinning Computer Kits includeParts List- cont’d Computer Window and Buttons ButtonsSetup mode options Setup ModeTo activate Set-Up Mode Setup Mode- cont’d Setup Mode- cont’d Sync Mode Press Reset ButtonRe-Syncing process Installation of Cadence Sensor All Spinners Installation Procedure V Bikes Time requiredParts required Tools requiredInstallation Procedure Pro 5800 / 6800 / Elite Installation Procedure Elite 6900 and NXT Installing or Replacing the Batteries Low Battery IndicatorFAQ’s and Troubleshooting FAQ’s and Troubleshooting cont’d Specifications Computer Heart Rate RangeMarketing Statement Regarding Heart Rate Layout Diagram = Daily = Weekly Maintenance ChecklistPreventative Maintenance Procedure Spinning Education 50%-65% 65%-75% 75%-85% 65%-92% 80%-92% Energy ZonesEnergy Zone Intensity Range Purpose What is Cadence? Cadence Range for Flat Roads 80-110 RPMPage Tips for Choosing AN Appropriate Cadence and Resistance Relationship Between Cadence and Resistance Cadence Drills Page Page Elapsed Time Duration Intensity TechniqueAdd resistance to moderate/heavy and combine all three Page Http//support.startrac.com