This computer also features:
•Second Wheel Option
•Easy Calibration Mode
•Wireless Mounting System
•
•Water resistant housing
•2 Year Warranty
•Backlit LCD display
What is included in your SpeedZone Elite package:
1. SpeedZone® computer (1) |
1
5 2
9
4
FIGURE 1: |
SENSOR |
PLACEMENT |
FIGURE 2: |
MAGNET |
ATTACHMENT |
The optimal distance between the com- puter and the transmitter is 24 inches (610mm) The distance may need to be less than 24 inches (610mm) if ambi- ent temperatures are below 40°F (4°C). To reduce signal loss in colder temper- atures, the transmitter should be mounted as close to the computer as possible. (Maximum mounting distance is 28 inches). Use the transmitter- mounting bracket and
2. Mounting bracket wired for cadence (1) | |
3. | Mounting bracket w/out cadence wiring (1) |
4. | Magnet with screw (1) |
5. | Cadence magnet (1) |
6. | Cable tie wraps (8) |
7. | Mounting bracket sizing straps (3) |
8. | Transmitter (1) |
9. | Transmitter mounting bracket (1) |
2
3 7
8 | 6 |
MOUNTING
THE SPEEDZONE® ELITE
The SpeedZone® Elite wireless transmit- ter can mount on the right or the left side of the fork blade. The right side should be used on large frames or when a suspension fork is installed.
ment of the magnet is correct.
(See figure 1).
Attach the magnet to a spoke across from the transmitter with the magnet screw. The clearance between the magnet and the transmitter should be approximately
3