Wheel Circumference Selection | Specialized CylcoComputer guide

PROGRAMMING Programming the functions of your SpeedZone® Elite requires it to be placed in various "modes" (i.e. odometer mode, distance mode). The computer can be cycled through these modes by pressing the "MODE" button located on the right-hand side of the housing. Once a specific mode has been entered, its values can be reset or adjusted by pressing either the "FUNCTION" button located on the left hand side of the housing or by using a combination of the "MODE" and "FUNCTION" buttons.

1.Miles or Kilometers selection Your SpeedZone® Elite will record speed and distance in either miles (M/h) or kilometers (Km/h). To enter

your selection of miles or kilometers, push the "MODE" button until ODO (odometer) appears on the left side of the display (This is called the odometer mode). Hold down the "FUNCTION" (left side) button and ‘tap’ the "MODE" button once. The Km/h, m/h indicator will begin blinking. You may now alter- nate between miles and kilometers by pressing the "MODE" button. When the correct choice is flashing, select it by pressing the "FUNCTION" button. You will now enter the "Programmable Odometer" mode. If the odometer set- ting is correct push the "FUNCTION" button five times to exit odometer mode. (Otherwise, see "Setting the programmable odometer" below).

2.Setting the Programmable Odometer

This mode is useful if you have replaced the battery and would like to retain the mileage you have already ridden. To access the programmable odometer mode, first advance the "MODE" button until (ODO) appears on the left-hand side of the screen. Hold down the "FUNCTION" button and ‘tap’ the "MODE" button once. The Km/h indicator will flash. If the Km/h setting is correct press the "FUNCTION" button once and a five- digit number will appear. You are now in the programmable odometer mode. To enter a mileage into the odometer, press the "MODE" button until the flashing digit is correct.

(Note: The "MODE" button may be held to scroll to the correct digit.) Press the "FUNCTION" button to select the next digit to the right. Repeat this process until all five digits are entered as your existing mileage.

3. Wheel Circumference Selection

To set the circumference for the type of tires you are using, you can use Specialized’s "Easy Calibration Mode" or measure your actual tire circumfer- ence by the rollout method. Two dif- ferent tire diameters may be entered by using the computer’s "Second Wheel Option."