5. Timer Selection
The timer can be selected for either Automatic Timer Mode (ATM) or Timer Mode (TM). The ATM selection allows you to keep track of your actual riding time. The timer only operates when the wheel is rotating and cannot be turned on or off manually.
The TM selection is just like a conven- tional stopwatch. The timer is activated manually and records the time whether the wheel is rotating or not. Tapping the "FUNCTION" button starts and stops the stopwatch and holding the "FUNCTION" button for three seconds will reset the stopwatch.
Note: The average speed (AVS) will be calculated differently based upon the selection of ATM or TM. If ATM is selected, the AVS is based upon only riding time. If TM is selected the AVS is
12
based on the total time the stopwatch is turned on or activated.
(See figure 11)
To select either TM or ATM, first press the "MODE" button until either "TM" or "ATM" appears on the left- hand side of the screen. To alternate between "TM" and "ATM" press the "MODE" and "FUNCTION" buttons simultaneously. Once the desired timer
FIGURE 11: ATM/TM SCREEN
mode has been selected, press the "FUNCTION" button to advance to the next operating mode.
6. Interval Timer
Your Speedzone Elite is equipped with an Interval Timer. This feature allows you to customize your training by inte- grating a programmable repeating countdown timer into your workout. To enter the interval timer mode, press the "MODE" button until "INT" appears on the
this number and advance to minutes. Repeat this process until minutes and seconds are set to the desired settings. Press the "FUNCTION" button to exit programming mode. Once the interval timer is programmed, press the "FUNCTION" button to start/stop the countdown. (See figure 12)
Note: The shortest interval that can be set is 5 seconds.
FIGURE 12: INTERVAL TIMER SCREEN
13