COMPUTER FUNCTIONS
Speedometer
Speed is always indicated on the top line of the screen. The speed is shown continuously up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h)
Average Speed (AVS)
The average speed is displayed on the lower line of the screen when AVS is shown on the left. The average speed is based upon whether the ATM or the TM mode has been selected, the reso- lution of the average speed is shown in 0.1M/h or Km/h increments.
(See figure 13)
+/- Average Speed Indicator
An up or down arrow displayed in the upper right side of the screen shows whether the current speed is above or below the average speed.
Maximum Speed (MAX)
The maximum speed is displayed on the lower line of the screen when MAX is shown on the left. The maximum
FIGURE 14: MAXIMUM SPEED SCREEN
speed is retained in memory and up- dated when a higher speed is attained. The maximum speed can be reset by pressing the "FUNCTION" button for three seconds. (See figure 14)
Auto Start/Stop Timer (ATM)
In ATM mode the stopwatch function records the actual time spent riding. It
operates only when there is speed input and is displayed on the lower line of the screen.
Timer Mode (TM)
In TM mode the stopwatch function will operate when the "FUNCTION" button is pressed. The stopwatch will record the total time after the button is pressed regardless of whether there is speed input or not. The average speed (AVS) will be calculated based on the time the timer mode is activated.
Interval Timer (INT)
The interval timer is displayed on the lower line of the screen when (INT) appears on the left. The timer indi- cates the end of an interval with one short beep per second for the last 4
FIGURE 13: AVERAGE SPEED SCREEN
14 | 15 |