14. |
|
Apply logo and height indicator labels (19) to | SIDE |
adjustment rod (18) as shown. Attach handle parts (37, | ACCESS |
38) to adjustment rod with screw (21), carriage bolt |
|
(20), and flange nut (8) as shown. |
|
|
|
NOTE: Holes in adjustment rod allow for either rear |
|
access or side access. |
|
18
19
IMPORTANT!:
Indicator labels should be applied as close to holes as possible to prevent labels from being damaged during height adjustment.
15. Insert handle assembly through pole mount assembly as shown.
Lock pole assembly in place at the 10’ (3.05 m) mark with pin (16).
16
38 8
37
20
20 21
15 | 10/04 | P/N 21168202 |