Spalding M682001 manual Screws removed in step

Page 18

5. Remove packaging materials from handle assemblies (17 and 3).

17

3

Remove screws on both sides of tube.

6. Slide upper tube (17) onto handle assembly (3). Reinsert screws removed in previous step as shown.

NOTE:

Rotate upper tube to line up screw holes. Reinsert screws removed in previous step as shown.

Screws removed in step 6

17

3

ID# M682001

12/06

18

Image 18
Contents Portable System Before YOU Start Safety Instructions Get to know the basic parts of your basketball system Parts List See Hardware Identifier #51 #39 #12 #18 #23 #26 #25 #16 #20 #22 #45 Hardware Identifier Plastic Spacers Caps & Clips Fig. a Hole Hole Do not Tighten Completely Do not Over Tighten Completed Assembly Section B Attach the Backboard 12/06 ID# M682001 USE EYE Protection When Installing Springs Install Slam Jam Rim to Backboard Screws removed in step 12/06 ID# M682001 If Using Sand 2 Gallons of ANTI-FREEZE is not Required RIM Cover Attachment Items Required for this Section Board PAD Installation