Before YOU Start

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circular motion to ream out any excess paint from holes if necessary.

NOTE: Not all items pictured are included with every model.

HEIGHT ADJUSTMENT

TO ADJUST BACKBOARD:

1. Grasp handle and press button.

2. Raise or lower to desired height.

3. Release button.

MOVING SYSTEM

1.Adjust basketball backboard height to lowest position.

2.While holding pole, rotate basketball system forward until wheels engage with ground.

3.Move basketball system to desired location.

4.Carefully rotate basketball system upright.

5.Check system for stability.

566200 12/05

NOTICE TO ASSEMBLERS

Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products, periodically inspect

for loose small parts.

Assembled unit MUST be filled with sand or water at ALL times.

ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift support system.

ID# M682001

12/06