Spalding M60 1111 manual 08/05 M601111

Page 13

3.Secure tank struts (16) to pole as shown.

Nut should be tightened until flush (even) with lock nuts outer edge. Place cap (17) over exposed end of bolt as shown.

10

13

16

10

17

14

WARNING!

TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

4.Rotate non-secured ends of tank struts (16) outward to mounting holes in tank as shown.Secure ends of tank struts (16) to tank as shown. Repeat for opposite side.

16

9 10

16

10

11

13

08/05

P/N M601111

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Write Model Number From Box Here Before YOU Start Safety Instructions Warranty Card Front Back Hardware Identifier NUTS, Washers & Metal Spacers Hardware Identifier Plastic Spacers & Caps Wood Board scrap Pole Pole Identification Mark AND/OR Do not Over Tighten 08/05 M601111 M601111 08/05 AND/OR Tighten just until washers 50 stop moving FIG. a M601111 08/05 Tighten ALL Hardware Toward Board Upper Elevator tube Lower Elevator tube Pole 08/05 M601111 M601111 08/05 Install Rim to Backboard Install net Garden Hose or Sand FIG. a Section F Install RIM Cover Section G Height Adjustment and Moving Label
Top Page Image Contents