Spalding M60 1111 manual Install net

Page 24

13.Install net (43).

A. B. C.

D.

14.Insert bolt (57) through left side upper elevator tube (33), then stretch spring (36) onto bolt (57). Insert bolt (57) through right side upper elevator tube (33) and secure with nut (21).

WARNING!

USE EYE PROTECTION

WHEN INSTALLING

SPRINGS.

NOTE:

Peel protective

film from surface

of acrylic

backboard prior

to use.

33

36

57

36

21

33

58

P/N M601111 08/05

24

Image 24
Contents Write Model Number From Box Here Before YOU Start Safety Instructions Warranty Card Front Back Hardware Identifier NUTS, Washers & Metal Spacers Hardware Identifier Plastic Spacers & Caps Wood Board scrap Pole Pole Identification Mark AND/OR Do not Over Tighten 08/05 M601111 M601111 08/05 AND/OR Tighten just until washers 50 stop moving FIG. a M601111 08/05 Tighten ALL Hardware Toward Board Upper Elevator tube Lower Elevator tube Pole 08/05 M601111 M601111 08/05 Install Rim to Backboard Install net Garden Hose or Sand FIG. a Section F Install RIM Cover Section G Height Adjustment and Moving Label