Spalding M60 1111 manual Section G Height Adjustment and Moving Label

Page 28

SECTION G: HEIGHT ADJUSTMENT AND MOVING LABEL

1.Apply Height Adjustment and Moving Label (42) to front of pole, where it is clearly visible.

HEIGHT ADJUSTMENT

TO ADJUST BACKBOARD:

1

 

 

1.

While holding handle, remove pin.

3

2.

Move elevator up or down to

 

 

desired height.

2

3.

Replace pin full length to lock

 

 

system at desired height.

 

 

 

2

MOVING SYSTEM

1

3

4

1.Adjust basketball backboard height to lowest position.

2.While holding pole, rotate basketball system forward

until wheels engage with ground.

3. Move basketball system to desired location.

2

4. Carefully rotate basketball system upright.

5. Check system for stability.

511679 05/05

42

2. A. While holding handle, remove pin (27).

B. Move elevator up or down to desired height. C. Replace pin (27) full length to lock system at

desired height.

58

WARNING!

 

DO NOT ALLOW

 

CHILDREN TO

 

ADJUST HEIGHT.

B.

 

27

A.

C.

P/N M601111 08/05

28

Page 27 Page 28
Image 28
Page 27 Page 28
Contents Write Model Number From Box Here Before YOU Start Safety Instructions Warranty Card Front Back Hardware Identifier NUTS, Washers & Metal Spacers Hardware Identifier Plastic Spacers & Caps Wood Board scrap Pole Pole Identification Mark AND/OR Do not Over Tighten 08/05 M601111 M601111 08/05 AND/OR Tighten just until washers 50 stop moving FIG. a M601111 08/05 Tighten ALL Hardware Toward Board Upper Elevator tube Lower Elevator tube Pole 08/05 M601111 M601111 08/05 Install Rim to Backboard Install net Garden Hose or Sand FIG. a Section F Install RIM Cover Section G Height Adjustment and Moving Label
Top Page Image Contents