Spalding M60 1111 manual M601111 08/05

Page 14

5.Insert axle (5) through wheel bracket (4). Secure wheels (6) to axle using pushnuts (7). Carefully tap pushnuts onto axle with hammer or mallet

IMPORTANT!

SIDE OF WHEEL WITH LONGER PLASTIC AXLE NEEDS TO FACE THE WHEEL BRACKET.

6

6 5 4

7

7

6.

Install wheel assembly to base (8) using bolts(9),

 

 

washers(10) and nuts (11) as shown.

9

 

 

 

 

10

NOTE:

CAREFULLY TIPPING THE SYSTEM ON IT'S SIDE WILL ALLOW EASIER ACCESS TO THE UNDERSIDE OF BASE.

8

10

11

P/N M601111 08/05

14

Image 14
Contents Write Model Number From Box Here Before YOU Start Safety Instructions Warranty Card Front Back Hardware Identifier NUTS, Washers & Metal Spacers Hardware Identifier Plastic Spacers & Caps Wood Board scrap Pole Pole Identification Mark AND/OR Do not Over Tighten 08/05 M601111 M601111 08/05 AND/OR Tighten just until washers 50 stop moving FIG. a M601111 08/05 Tighten ALL Hardware Toward Board Upper Elevator tube Lower Elevator tube Pole 08/05 M601111 M601111 08/05 Install Rim to Backboard Install net Garden Hose or Sand FIG. a Section F Install RIM Cover Section G Height Adjustment and Moving Label