i n t e l l i g e n t w i r e l e s s | p l a t f o r m |
2.10. airClient TOTAL Router / NAT Configuration
This section covers the procedures for configuring various parameters in the Router and NAT modes.
2.10.1.LAN Settings
The LAN and the WLAN settings are maintained in two different subnets.
Follow the steps below to
1.From the navigation menu bar, click on Home LAN Settings to change Ethernet/wired side parameters. The LAN Settings screen will appear as shown below.
2.Enter the System Name of the unit, if required.
3.Enter the IP address and Subnet mask to set the LAN IP address and subnet mask.
4.Click on Save to apply the settings.
Figure 2-21 airClient TOTAL Router/NAT LAN Settings
airClient™ TOTAL 3415 User Guide | Page 36 of 75 |
|