SmartBridges sB3415-03, sB3415-02, sB3415-01 manual Wireless Settings

i n t e l l i g e n t w i r e l e s s p l a t f o r m

3. Wireless Settings and Bandwidth Controller

3.1. Wireless Settings

The Wireless Settings can be accessed from the Radio Wireless Settings in the navigation menu bar.

Figure 3-1 airClient TOTAL Wireless Settings

The following table summarizes the information for the wireless settings.

	Table 3-1 Wireless Settings
Page Items	Descriptions
SSID	The network name for the wireless network.
SSID Suppressed	Shows if the SSID Suppressed is Enable or Disabled
	This is not selectable in the current Router/NAT device
	configuration or Client Bridge Mode configuration on3415-03.
Channel	The client will follow the channel of the AP to be associated
	with.
	The channel has to be set explicitly in the WDS Bridge Mode
	configuration (sB3415-03 only)
Remote AP MAC	This is the MAC address of the remote Access Point.
Address	This has to be set in WDS Bridge Mode configuration (sB3415-

airClient™ TOTAL 3415 User Guide Page 52 of 75