Playing Back CDs | Continued |
|
English
Loading CDs
1 Press 0for the disc tray (CD 1 to
CD 3) you want to load a CD onto.
Playing Back the Entire Discs — Continuous Play
You can play CDs continuously.
The unit automatically turns on and the disc tray comes out.
2 Place a disc correctly on the circle of the disc tray, with its label side up.
CORRECT INCORRECT
1 Load CDs.
2 Press one of the disc number buttons (CD 1, CD 2, and CD 3) on the unit or on the remote control for the disc you want to play.
CD play starts from the first track of the selected disc.
Elapsed playing
Track number time
CD 
CD 
CD
CD1 CD2 CD3
•When using a CD single (8 cm), place it on the inner circle of the disc tray.
3 Press the same 0you have pressed in step 1.
The disc tray closes, and the corresponding disc number indicator (CD 1 to CD 3) lights up on the display.
4 Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
When you press 0for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Disc indicator
Disc marker
Disc number
•The disc marker lights up for the disc number you have selected.
•The disc indicator flashes while the corresponding CD is being played.
•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.
A.BASS EX S.MODE
•Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.
To stop during play, press 7on the unit (or CD 7on the remote control.)
To remove the disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded in the disc trays, they are played in one of the following sequences.
•When CD 1 is pressed : CD 1 ] CD 2 ]CD 3 (then stops)
•When CD 2 is pressed : CD 2 ] CD 3 ]CD 1 (then stops)
•When CD 3 is pressed : CD 3 ] CD 1 ]CD 2 (then stops)
*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press 0corresponding to a CD, not playing or selected currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD 6.
C D
SELECT
A.BASS EX S.MODE
While pausing, the elapsed playing time flashes on the display. To resume play, press CD 6again.
– 12 –