JVC MX-J270V manual Connecting Other Equipment, Adjusting the Voltage Selector

Connecting Other Equipment

You can connect ordinary audio equipment as well as audio- visual equipment. When connecting VCR, you can record Video CDs program easily.

When you connect and use this equipment, refer also to its manual.

Be sure that the plugs of the audio- and video cords are color coded: White plugs and jacks are for left audio signals, red ones for right audio signals, and yellow one for video signal.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio-visual equipment

ANTENNA
FM
FM
75	GND
AM
EXT	GND
AM LOOP
AUX
IN
RIGHT	LEFT
AUX
OUT
CAUTION:	SPEAKERS
SPEAKER IMPEDANCE
6~16 OHMS
RIGHT	LEFT
	LINE VOLTS
	220V	110V
	230V	127V	VIDEO
	-240V		OUT
To Audio Input			To Video
			Input
Audio equipment
To Audio
Output
			TV

Connect the audio output jacks on the other equipment and the AUX IN jacks on the rear, the audio input jacks on the other equipment and AUX OUT jacks on the rear, as well as the video input jacks and the VIDEO OUT jack on the rear, using an audio and/or video cords.

English

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.

• DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.

6~16 OHMS
RIGHT	LEFT
	LINE VOLTS
	220V	110V
	230V	127V	VIDEO
	-240V		OUT
		LINE VOLTS
		220V	110V

230V

-240V 127V

Voltage mark

Use a screwdriver to rotate the voltage selector so the voltage number the voltage mark is pointing at is the same as the voltage where you are plugging in the unit.

NOW, you can plug in the unit and other connected equipment FINALLY!

ANTENNA
FM
FM
75	GND
AM
EXT	GND
AM LOOP
AUX
IN
RIGHT	LEFT
AUX
OUT
CAUTION:	SPEAKERS
SPEAKER IMPEDANCE
6~16 OHMS
RIGHT	LEFT
	LINE VOLTS
	220V	110V
	230V	127V	VIDEO
	-240V		OUT

To a wall outlet

– 8 –