English
Playing Back Tapes
You can play back type I, type II and type IV tapes without changing any settings.
Playing Back a Tape
1 Press EJECT (0) for the deck you want to use.
| 0EJECT |
0EJECT | For deck B |
For deck A
2 Put a cassette in, with the exposed part of the tape down.
0EJECT
0EJECT
3 Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or TAPE A or TAPE B on the remote control.)
4 On the unit: |
|
Press TAPE 23. | TAPE |
| |
• Each time you press the button, the tape |
|
direction changes: |
|
To play both sides repeatedly — Reverse Mode
Reverse Mode works for both deck A and deck B.
When it is in use, the tape automatically reverses at the end of a side and the unit starts playing the other side of the tape, and repeats the same process.
To use Reverse Mode, press REVERSE MODE | REVERSE MODE | |
repeatedly so that the Reverse Mode indicator on the |
| |
display lights up as — | . |
|
•Each time you press the button, Reverse Mode changes as follows:
: The cassette deck automatically stops after playing both sides of the tape. (Stops when playback in the 2 direction is finished.)
: The cassette deck continues to play both sides of the tape until the 7 button is pressed.
: The cassette deck automatically stops after playing one side of the tape.
When Reverse Mode is on with cassettes in both decks A and B
After the reverse (2) side of the tape finishes playing, the tape in the other deck starts playing.
Locating the Beginning of a Song — Music Scan
You can use Music Scan to locate the beginning of a song. Music Scan searches for blank portions that usually separate recorded songs, then plays the next song.
3 | : plays the front side. |
2 | : plays the reverse side. |
To find the beginning of the current song
During play, press 4/ ¢ (1 or Á on
– PRESET +
On the remote control:
Press TAPE 3 for forward direction playback, or press
TAPE
the remote control) in the opposite direction
to the tape play.
The tape direction indicator of the opposite direction to the tape play starts flashing
PREV NEXT
TAPE 2for reverse direction playback.
TAPE
When the tape plays to the end, the deck
automatically stops if the Reverse Mode is not on. (See “To play both sides repeatedly — Reverse Mode.”)
To stop during play, press 7(or TAPE 7on the remote control.)
To operate the other deck, press TAPE A/B (or TAPE A or TAPE B on the remote control), then TAPE 23(or TAPE 3 or TAPE 2on the remote control.)
To fast wind to the left or to the right, press 4 or ¢ (or
1or Áon the remote control) while the tape is not running. The tape direction indicator (2 3) starts flashing quickly on
the display.
slowly and quickly alternately.
Searching stops automatically at the beginning of the current song, and the current song starts automatically.
To remove the cassette, press 0EJECT for deck A or EJECT 0 for deck B.
– 19 –