Suunto M1, M2 manual Display during exercise, Example adjusting alarm settings

Page 25

buttons off: you will hear all other sounds, except button presses

en

all off: all sounds are off (when the sounds are off, is shown on the

 

 

display during exercise)

 

TIP: Switch the sounds on or off () during exercise by keeping pressed. You cannot switch the sounds on, if you have set sounds to all off .

Example: adjusting alarm settings

When the alarm is on, is shown on the display.

To set the alarm on/off:

1.In the time view, keep pressed to enter the settings.

2.Browse to alarm with and confirm with .

3.Set the alarm on or off with and . Confirm with .

4.Set the alarm time with and . Confirm with .

When the alarm sounds, press stop () to turn it off.

After you have stopped the alarm, it sounds the same time the following day. Remove the alarm in the settings.

25

Image 25
Contents Suunto M1/M2 Page Page Types of safety precautions Safety precautions SafetyPage Welcome Display Icons and Segments Select exercise, history & trend, prev. exercise Using ButtonsGetting Started To set the initial settingsDate Estimating your fitness levelPage Using Button Lock M1 heart rate belt M2 heart rate belt Putting on HR BeltPage Starting Exercise Troubleshooting Heart rate zones During ExercisePage From Poor to Excellent Level After Exercise Select prev. exercise History & trend Reviewing HistoryTo review history & trend or prev. exercise Select history & trend or prev. exercise with orPrevious exercise Sounds Adjusting SettingsDisplay during exercise Example adjusting alarm settingsChanging language Sleep mode and initial settingsReplacing battery Care and MaintenancePage Replacing HR belt battery Technical specifications SpecificationsGeneral Log recorder/stopwatchTrademark Personal settingsFCC compliance 15.4 CECopyright Patent notice IcesWarranty Period WarrantyExclusions and Limitations Access to Suunto warranty service Limitation of Liability Suunto Help Desk