Philips 861304 Troubleshooting while the FRx is being used, Defibrillator says, To replace pads

Page 55

47

If the FRx does not turn on when you press the On/Off button, remove the battery and replace it with a new battery if available and press the On/Off button to turn on the defibrillator. If no spare battery is available, remove the installed battery for five seconds, then reinsert it and run a battery insertion self-test.

If the problem continues, do not use the defibrillator. Attend to the patient, providing CPR if needed, until emergency medical personnel arrive.

Troubleshooting while the FRx is being used

(green Ready light is solid)

Always follow any instructions the device gives.

Philips Medical Systems

defibrillator says:

... to replace the battery immediately

... to plug in pads connector

... to replace pads

... to press the pads firmly to the skin

... to make sure the pads have been removed from the case

... the pads should not be touching the patient’s clothing

... to make sure the pads connector is fully inserted

possible cause

The battery is nearly depleted. The FRx will turn off unless a new battery is installed.

•The pads connector has been unplugged.

•The pads have been damaged.

•The pads have been peeled from the case, but have not been successfully attached to the patient. There may be a problem with the pads.

•The pads are not properly applied to the patient.

•The pads are not making good contact with the patient's bare chest because of moisture or excessive hair.

•The pads are touching each other.

•The pads may not have been removed from the case or may be on the patient’s clothing.

•Pads connector is not fully inserted.

recommended action

Install a new battery immediately.

•Plug in the pads connector.

•Replace the damaged pads.

•Replace the pads on patient with new pads to continue with the rescue.

•Make sure that the pads are sticking completely to the patient’s skin.

•If the pads are not sticking, dry the patient's chest and shave or clip any excessive chest hair.

•Reposition the pads.

•Make sure pads are not in the case or on patient’s clothing.

•Make sure the pads connector is fully inserted.

If the voice instruction continues after you do these things, replace the pads set.

APPENDICES

Page 54 Page 56
Image 55
Page 54 Page 56
Contents N E R ’ S M a N U a L 861304Edition Philips Medical Systems Quick Reference Intentionally blank HeartStart FRx Device Tracking About This Edition Edition HistoryCopyright Authorized EU RepresentativeContents Appendices Sudden Cardiac Arrest DescriptionTraining and practice Indications for UseState and local requirements For more information Package contents1A. Remove Pads Case from packaging Setting up the FRxPhilips Medical Systems Recommended accessories Overview Using the HeartStart FRxFollow the FRx’s voice instructions Press the green on/off buttonOpen the pads case as shown below. Peel off one pad If a shock is needed Press the flashing orange Shock button if instructedIf a shock is not needed Treating infants and childrenKey if available Infant/Child Key When emergency medical services arrivePhilips Medical Systems After each use After using the HeartStart FRxFRx data storage Maintaining the HeartStart FRx Routine maintenancePeriodic checks Cleaning the FRxDisposing of the FRx Troubleshooting tips Appendices Philips Medical Systems Accessories Appendices Glossary of terms Coaching, if selected, appropriate for infants and children HeartStart Event ReviewButton Infant/Child KeyPads See Smart Pads When a battery is insertedPatient care in the AED mode On/Off buttonWaveform See Smart biphasic waveform Standby modeBlinking green Ready light Consciousness, absence of respiration, and lack of a pulseStandby mode gives device status Glossary of symbols/controlsShock is advised, as a reminder not to touch the patient Symbol  #  Appendices Accessories Please read these warnings and precautions carefullyApproved accessories are used Hazard. Do not sterilize the FRx or its accessoriesPrecautions Environmental HeartStart FRx 861304 Defibrillator specificationsTechnical information PhysicalCategory Specifications Sealing Controls and indicatorsProtected Current a Defibrillation waveformNewborn 14 J/kg Disarm AED mode Adult shock delivery vectorCategory Energy Charge control Shock-to-shock cycle time Energy doseECG analysis performance ECG analysis systemRhythm class Samplea size Performance Lower HeartStart Smart Pads II Accessories specificationsCategory Battery type Capacity M5070A battery and 989803139301 TSO C-142* batteryInfant/Child Key Environment Environmental considerationsRegulations Overview Device options ConfigurationPatient treatment protocol options Is detected in a motionless NSA pause type SettingsDefibrillator conducts Background monitoring. If aInstructs Instructions provided at User that it is CPR prompt SettingsCPR1 Instructs the user to begin CPR CPR reminder voiceCPR Coaching infant/child ventilation instruction When an adult pads set isInstalled Pads set is installedRecommended action when you need to use the device Testing and troubleshootingTesting TroubleshootingTo make sure the pads have been removed from the case Troubleshooting while the FRx is being usedDefibrillator says To replace padsDefibrillator says To stop all motion Behavior Troubleshooting while the FRx is not being usedEmissions test Additional technical data required for European conformityElectromagnetic conformity Electromagnetic emissionsElectromagnetic immunity = 1.15√ P Rated maximum output power of transmitter W 100Separation distance according to frequency of transmitter m MHz to2.5 GHzAppendices Philips Medical Systems Intentionally blank Latin America Philips Medical Systems United StatesCanada Europe, Middle East, and Africa

861304 specifications

The Philips 861304 is a versatile and advanced home appliance that blends functionality with sleek design, making it an ideal choice for modern households. This innovative product is particularly known for its impressive performance in the realm of kitchen technology.

One of the standout features of the Philips 861304 is its state-of-the-art cooking capabilities. Equipped with an advanced heating system, the appliance ensures even and precise cooking temperatures. The user can enjoy a variety of cooking modes, including steaming, baking, and grilling, which allow for diverse culinary experiments. This versatility is complemented by a robust set of presets that simplify meal preparation, making it accessible for even novice cooks.

In terms of technology, the Philips 861304 utilizes innovative Rapid Air Technology that circulates hot air around the food. This not only ensures even cooking but also enhances the flavor while reducing the need for excess oil, making meals healthier. The appliance also features an intuitive touch-screen interface, allowing users to select their desired cooking settings with ease. This user-friendly design is critical for those who are busy but still want to enjoy home-cooked meals without the stress of complicated controls.

Another key characteristic of the Philips 861304 is its commitment to safety. The appliance is equipped with multiple safety features, including an automatic shut-off function and cool-touch handles, ensuring peace of mind during operation. Its compact design makes it suitable for kitchens of all sizes, allowing users to enjoy high-end cooking technology without sacrificing counter space.

The Philips 861304 is also designed with cleanliness in mind. The non-stick surface ensures easy food release and simplifies the cleaning process. Many components are dishwasher-safe, further streamlining maintenance and promoting a hygienic cooking environment.

In summary, the Philips 861304 stands out in the crowded market of kitchen appliances due to its advanced heating technology, user-friendly interface, and commitment to safety and cleanliness. Its combination of versatility and performance makes it a valuable addition to any culinary space, empowering users to effortlessly create delicious and healthy meals.
Top Page Image Contents