Philips 861304 Separation distance according to frequency of transmitter m, MHz to2.5 GHz, 115

Page 60

52

Recommended separation distances between portable and mobile RF communications equipment and the HeartStart FRx Defibrillator

The HeartStart FRx Defibrillator is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the FRx can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the FRx as recommended below, according to the maximum output power of the communications equipment.

separation distance according to frequency of transmitter (m)

APPENDICES

rated maximum output power of transmitter (W)

0.01

0.1

1

10

100

80 MHz to 800 MHz

800 MHz to2.5 GHz

d = 0.6√ P

d = 1.15√ P

0.06

0.115

0.19

0.36

0.6

1.15

1.9

3.64

6.0

11.5

Philips Medical Systems

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1. At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2. The ISM (industrial, scientific and medial) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz; 13,553 MHz to 13, 567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz.

NOTE 3. An additional factor of 10/3 is used in calculating the recommended separation distance for transmitters in the ISM frequency bands between 150 kHz and 80 MHz and in the frequency range 80 MHz to 2.5 GHz to decrease the likelihood that mobile/portable communications equipment could cause interference if it is inadvertently brought into patient areas.

NOTE 4. These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

NOTE 5. Transmitters/antenna of this power-level are most likely mounted on an emergency vehicle chassis. The distances cited here are for open field. For an external antenna, the separation distance is most likely shorter.

HEARTSTART FRx 861304 OWNER’S MANUAL

Image 60
Contents 861304 N E R ’ S M a N U a LEdition Philips Medical Systems Quick Reference Intentionally blank HeartStart FRx About This Edition Edition History CopyrightAuthorized EU Representative Device TrackingContents Appendices Description Sudden Cardiac ArrestIndications for Use Training and practiceState and local requirements Package contents For more informationSetting up the FRx 1A. Remove Pads Case from packagingPhilips Medical Systems Recommended accessories Using the HeartStart FRx OverviewPress the green on/off button Follow the FRx’s voice instructionsOpen the pads case as shown below. Peel off one pad Press the flashing orange Shock button if instructed If a shock is neededTreating infants and children If a shock is not neededKey if available When emergency medical services arrive Infant/Child KeyPhilips Medical Systems After using the HeartStart FRx After each useFRx data storage Routine maintenance Maintaining the HeartStart FRxCleaning the FRx Periodic checksDisposing of the FRx Troubleshooting tips Appendices Philips Medical Systems Accessories Appendices Glossary of terms HeartStart Event Review ButtonInfant/Child Key Coaching, if selected, appropriate for infants and childrenWhen a battery is inserted Patient care in the AED modeOn/Off button Pads See Smart PadsStandby mode Blinking green Ready lightConsciousness, absence of respiration, and lack of a pulse Waveform See Smart biphasic waveformGlossary of symbols/controls Standby mode gives device statusShock is advised, as a reminder not to touch the patient Symbol  #  Appendices Please read these warnings and precautions carefully Approved accessories are usedHazard. Do not sterilize the FRx or its accessories AccessoriesPrecautions HeartStart FRx 861304 Defibrillator specifications Technical informationPhysical EnvironmentalControls and indicators Category Specifications SealingProtected Defibrillation waveform Current aDisarm AED mode Adult shock delivery vector Category Energy Charge control Shock-to-shock cycle timeEnergy dose Newborn 14 J/kgECG analysis system ECG analysis performanceRhythm class Samplea size Performance Lower Accessories specifications HeartStart Smart Pads IIM5070A battery and 989803139301 TSO C-142* battery Category Battery type CapacityInfant/Child Key Environmental considerations EnvironmentRegulations Configuration Overview Device optionsPatient treatment protocol options NSA pause type Settings Defibrillator conductsBackground monitoring. If a Is detected in a motionlessCPR prompt Settings CPR1 Instructs the user to begin CPRCPR reminder voice Instructs Instructions provided at User that it isWhen an adult pads set is InstalledPads set is installed CPR Coaching infant/child ventilation instructionTesting and troubleshooting TestingTroubleshooting Recommended action when you need to use the deviceTroubleshooting while the FRx is being used Defibrillator saysTo replace pads To make sure the pads have been removed from the caseDefibrillator says To stop all motion Troubleshooting while the FRx is not being used BehaviorAdditional technical data required for European conformity Electromagnetic conformityElectromagnetic emissions Emissions testElectromagnetic immunity Rated maximum output power of transmitter W 100 Separation distance according to frequency of transmitter mMHz to2.5 GHz = 1.15√ PAppendices Philips Medical Systems Intentionally blank Philips Medical Systems United States CanadaEurope, Middle East, and Africa Latin America

861304 specifications

The Philips 861304 is a versatile and advanced home appliance that blends functionality with sleek design, making it an ideal choice for modern households. This innovative product is particularly known for its impressive performance in the realm of kitchen technology.

One of the standout features of the Philips 861304 is its state-of-the-art cooking capabilities. Equipped with an advanced heating system, the appliance ensures even and precise cooking temperatures. The user can enjoy a variety of cooking modes, including steaming, baking, and grilling, which allow for diverse culinary experiments. This versatility is complemented by a robust set of presets that simplify meal preparation, making it accessible for even novice cooks.

In terms of technology, the Philips 861304 utilizes innovative Rapid Air Technology that circulates hot air around the food. This not only ensures even cooking but also enhances the flavor while reducing the need for excess oil, making meals healthier. The appliance also features an intuitive touch-screen interface, allowing users to select their desired cooking settings with ease. This user-friendly design is critical for those who are busy but still want to enjoy home-cooked meals without the stress of complicated controls.

Another key characteristic of the Philips 861304 is its commitment to safety. The appliance is equipped with multiple safety features, including an automatic shut-off function and cool-touch handles, ensuring peace of mind during operation. Its compact design makes it suitable for kitchens of all sizes, allowing users to enjoy high-end cooking technology without sacrificing counter space.

The Philips 861304 is also designed with cleanliness in mind. The non-stick surface ensures easy food release and simplifies the cleaning process. Many components are dishwasher-safe, further streamlining maintenance and promoting a hygienic cooking environment.

In summary, the Philips 861304 stands out in the crowded market of kitchen appliances due to its advanced heating technology, user-friendly interface, and commitment to safety and cleanliness. Its combination of versatility and performance makes it a valuable addition to any culinary space, empowering users to effortlessly create delicious and healthy meals.