Schwinn 212 manual Assembly Stage #3, Attach Front Stabilizer Tube and Pedals to Main Unit

Page 11

Assembly Stage #3

Attach Front Stabilizer Tube and Pedals to Main Unit

Assembly Hardware Required:

(2) Flat Head Screws (item #12)

Step 8: Attach FRONT STABILIZER TUBE (#11) to the MAIN UNIT (#13) with 2 FLAT HEAD SCREWS (#12). Tighten Bolts with provided wrench.

Step 9: Attach RIGHT PEDAL (#14) to the right crank arm on the MAIN UNIT (#31). Thread the pedal onto the crank arm and then tighten with pedal wrench. Attach LEFT PEDAL (#14) to the left crank arm on the MAIN UNIT (#13). Thread the pedal onto the crank arm and then tighten with pedal wrench. Note: There is a right pedal and a left pedal, marked by R and L. The threading on the left pedal is reversed from the right pedal. Counterclockwise rotation tightens while Clockwise rotation loosens on the left pedal. To avoid stripping of the threads be careful to use the proper pedal.

Attach PEDAL STRAPS (#18) to each PEDAL (#14). Again, each strap is labeled with an R or an L corresponding to the right and left pedal straps.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Schwinn Recumbent Exercise Bike Fitness Safeguards and Warnings Page Quantity Description Reference # Parts ListStage#4 Hardware ChartAssembly Drawing with Reference Numbers Replacement Parts List Screws M4x14L item #29 Assembly Stage #1Assemble Seat and Handle Bar Assembly hardware required InstructionsPage Flat Head Screws item #12 Assembly hardware required M8 Allen Bolts 16mm item #5Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Stage #3Flat Washers item #15 Assembly Stage #4None Assembly Stage #5Attach Console Mast to Main Unit Assembly Stage #6Computer Screws item #3 Seat AdjustmentProblem Computer will not start, function, or is blank… Troubleshooting the Schwinn 212 Recumbent Exercise Bike
Related manuals
Manual 34 pages 45.32 Kb
Top Page Image Contents